Introduction to Welding will introduce welding technology with an emphasis on basic welding laboratory principles and operating procedures. Students will be introduced to the three basic welding processes. Topics include: industrial safety and health practices, hand tool and power machine use, measurement, laboratory operating procedures, welding power sources, welding career potentials, and introduction to welding codes and standards. Introduction to Welding will provide students with the knowledge, skills, and technologies required for employment in welding industries. This course supports integration of academic and technical knowledge and skills. Students will reinforce, apply, and transfer knowledge and skills to a variety of settings and problems. Knowledge about career opportunities, requirements, and expectations and the development of workplace skills will prepare students for future success.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
Resources
Scope and Sequence
Scope and Sequence: Introduction to Welding
CTE TEKS - Implemented 2017-2018, adopted in 2015
Introduction to Welding course scope and sequence within the Manufacturing Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
View ResourceProgram of Study
Program of Study: Health, Safety, and Environmental Assurance
Based on the House Bill 5 Foundation High School Program, the Health, Safety, and Environmental Assurance program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Program of Study
Program of Study: Manufacturing Production and Procedure
Based on the House Bill 5 Foundation High School Program, the Manufacturing Production and Procedure program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Program of Study
Program of Study: Production
Based on the House Bill 5 Foundation High School Program, the Production program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Program of Study
Program of Study: Quality Assurance
Based on the House Bill 5 Foundation High School Program, the Quality Assurance program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Unit 1: Academic Knowledge and Skills for Manufacturing
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 3: Welding Fundamentals
Lesson Plan: Manufacturing - Welding Basic Lines and Views
In this lesson, students will demonstrate knowledge of welding sketches and identify types of welds such as fillet, groove, spot, plug, and flanged.
View ResourceUnit 3: Welding Fundamentals
Review the scope and sequence document. One or more lesson plans are currently not available.
One or more lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 4: Oxy-Fuel Cutting
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 5: Shielded Metal Arc Welding (SMAW)
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 6: Gas Metal Arc Welding
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 7: Welding Project Design
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 8: Employability Skills
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 9: Career Professional Development
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View Resource