Welding I provides the knowledge, skills, and technologies required for employment in metal technology systems. Students will develop knowledge and skills related to this system and apply them to personal career development. This course supports integration of academic and technical knowledge and skills. Students will reinforce, apply, and transfer knowledge and skills to a variety of settings and problems. Knowledge about career opportunities, requirements, and expectations and the development of workplace skills prepare students for future success.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
Resources
Scope and Sequence
Scope and Sequence: Welding I
CTE TEKS - Implemented 2017-2018, adopted in 2015
Welding I course scope and sequence within the Manufacturing Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
View ResourceProgram of Study
Program of Study: Health, Safety, and Environmental Assurance
Based on the House Bill 5 Foundation High School Program, the Health, Safety, and Environmental Assurance program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Program of Study
Program of Study: Manufacturing Production and Procedure
Based on the House Bill 5 Foundation High School Program, the Manufacturing Production and Procedure program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Program of Study
Program of Study: Production
Based on the House Bill 5 Foundation High School Program, the Production program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Program of Study
Program of Study: Quality Assurance
Based on the House Bill 5 Foundation High School Program, the Quality Assurance program of study within the Manufacturing Career Cluster® provides helpful information, including the core courses and career-related electives in high school that will help prepare students for their career goals. This document is designed for students, but can also be used by administrators, counselors, teachers, business and industry representatives, and parents.
Unit 1: Academic Knowledge and Skills for Manufacturing
Lesson Plan: Basic Angles in Welding
This lesson helps students to get acquainted with instructions to build correct angles for various welding projects.
View ResourceUnit 1: Academic Knowledge and Skills for Manufacturing
Lesson Plan: Welding Box Project
It is critical that students are able to demonstrate welding skills necessary to complete a project independently. In this lesson, students will construct a 5x3 divided metal box.
View ResourceUnit 1: Academic Knowledge and Skills for Manufacturing
Lesson Plan: Manufacturing - Filling the Gap
In this lesson, students will demonstrate their ability to fill the end of a 1 inch piece of square tubing. It is critical that students are able to fill gaps with an arc weld.
View ResourceUnit 1: Academic Knowledge and Skills for Manufacturing
Lesson Plan: Fluxed Core Arc Welding (FCAW)
It is critical that students are able to demonstrate the proper processes to use in Fluxed Core Arc Welding (FCAW). In this lesson, students will learn the methods used in Fluxed Core Arc Welding.
View ResourceUnit 1: Academic Knowledge and Skills for Manufacturing
Lesson Plan: Using a Ruler
Through this lesson, students will be able to read and use a ruler to conduct work pertaining to welding.
View ResourceUnit 1: Academic Knowledge and Skills for Manufacturing
Review the scope and sequence document. One or more lesson plans are currently not available.
One or more lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Lesson Plan: Basic Angles in Welding
This lesson helps students to get acquainted with instructions to build correct angles for various welding projects.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Lesson Plan: Basic Metals in Welding
In this lesson, students will identify commonly used terms associated with metals, types of metals, and shapes of metals. In groups, students will conduct a Spark Test to sample different metals.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Lesson Plan: Welding Box Project
It is critical that students are able to demonstrate welding skills necessary to complete a project independently. In this lesson, students will construct a 5x3 divided metal box.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Lesson Plan: Manufacturing - Filling the Gap
In this lesson, students will demonstrate their ability to fill the end of a 1 inch piece of square tubing. It is critical that students are able to fill gaps with an arc weld.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Lesson Plan: Fluxed Core Arc Welding (FCAW)
It is critical that students are able to demonstrate the proper processes to use in Fluxed Core Arc Welding (FCAW). In this lesson, students will learn the methods used in Fluxed Core Arc Welding.
View ResourceUnit 2: Workplace Regulations, Safety Compliance
Review the scope and sequence document. One or more lesson plans are currently not available.
One or more lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 3: Welding Fundamentals
Lesson Plan: Basic Angles in Welding
This lesson helps students to get acquainted with instructions to build correct angles for various welding projects.
View ResourceUnit 3: Welding Fundamentals
Lesson Plan: Welding Box Project
It is critical that students are able to demonstrate welding skills necessary to complete a project independently. In this lesson, students will construct a 5x3 divided metal box.
View ResourceUnit 3: Welding Fundamentals
Lesson Plan: Manufacturing - Filling the Gap
In this lesson, students will demonstrate their ability to fill the end of a 1 inch piece of square tubing. It is critical that students are able to fill gaps with an arc weld.
View ResourceUnit 3: Welding Fundamentals
Lesson Plan: Fluxed Core Arc Welding (FCAW)
It is critical that students are able to demonstrate the proper processes to use in Fluxed Core Arc Welding (FCAW). In this lesson, students will learn the methods used in Fluxed Core Arc Welding.
View ResourceUnit 4: Oxy-Fuel Cutting
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 5: Plasma Arc Cutting
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 6: Shielded Metal Arc Welding (SMAW)
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 7: Gas Metal Arc Welding
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 8: Fluxed Core Arc Welding
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 9: Gas Tungsten Arc Welding
Lesson plans are currently not available. Review the scope and sequence document and TEKS.
Lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 10: Employability Skills
Lesson Plan: Success in the Welding Shop
In this lesson, the student will be able to successfully participate in a welding shop environment and interview for a position in a shop.
View ResourceUnit 10: Employability Skills
Review the scope and sequence document. One or more lesson plans are currently not available.
One or more lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View ResourceUnit 11: Career Professional Development
Lesson Plan: Welding Box Project
It is critical that students are able to demonstrate welding skills necessary to complete a project independently. In this lesson, students will construct a 5x3 divided metal box.
View ResourceUnit 11: Career Professional Development
Lesson Plan: Manufacturing - Filling the Gap
In this lesson, students will demonstrate their ability to fill the end of a 1 inch piece of square tubing. It is critical that students are able to fill gaps with an arc weld.
View ResourceUnit 11: Career Professional Development
Lesson Plan: Success in the Welding Shop
In this lesson, the student will be able to successfully participate in a welding shop environment and interview for a position in a shop.
View ResourceUnit 11: Career Professional Development
Review the scope and sequence document. One or more lesson plans are currently not available.
One or more lesson plans are currently not available. Review the scope and sequence document, TEKS, and available lesson plans, to determine which additional lesson plans to locally develop.
You can download the optional blank lesson plan template provided here, to locally develop a new lesson plan, consistent with the others provided in the Texas CTE Resource Center.
If after developing a new lesson plan, you would like the TEA to consider adding it to the resource library for colleague teachers to also use in the future, attach the lesson plan and any supplemental instructional materials through the form here, for consideration. If published, we will attribute the materials to you.
View Resource