Image
1 RESOURCE(S)
CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Plumbing Technology II course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)In Plumbing Technology II, students will gain the advanced knowledge and skills needed to enter the industry as a plumber, building maintenance technician, or supervisor or prepare for a postsecondary degree in mechanical engineering. Students will acquire knowledge and skills in plumbing codes, industry workplace basics, and employer/customer expectations, including tool and jobsite safety, advanced plumbing mathematics, commercial drawings, basic electricity, hanger installation, supports and structural penetrations, roof drains, fixture installation, valves and faucets, and oxy-fuel safety. Students will also learn about setup, cutting, brazing, and welding water system sizing; gas, drain, waste and vent installation and testing; and water heater installation.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.
1 RESOURCE(S)CTE TEKS - Implemented 2017-2018, adopted in 2015
Practicum in Construction Management course scope and sequence within the Architecture and Construction Career Cluster® summarizes the content to be taught, and one possible order for teaching the units of instruction. A brief description of each unit and the corresponding TEKS are included. This scope and sequence may be adapted or adopted by the local education agency.
1 COURSE BINDER(S)Practicum in Construction Management is an occupationally specific course designed to provide classroom technical instruction or on-the-job training experiences. Safety and career opportunities are included in addition to work ethics and job-related study in the classroom.
This binder does not contain all lesson plans for this course. This content can be used with any textbook or instructional materials. If locally adapted, make sure all TEKS are covered.